Homogenizer Maintenance, Service and Repair
Centri-Force maintains, services and repairs all makes of Homogenizer.
Centri-Force has been repairing and servicing Homogenizers for thirty years. Some of the equipment we service regularly is more than fifty years old and with care and attention can still look forward to more years of faithful service. Our routine service consists of full block and stage assembly strip-down, inspection and re-seal. Because these machines run at very high pressures so we only use nylon seals where possible.
We carry out full engine oil drain-down, gear-box clean/inspection, replace oil & filters, check & adjust drive belts, re-grease and test run motors.
We also carry out a full test run before leaving site and supply you with a full report on all the work conducted. We will issue a list of spare parts used and highlight any faults found during the service or any remedial work required.
Depending on the running time of your machine we can arrange service intervals on a four, six or twelve monthly schedule.
Whether it may be to conduct on site scheduled maintenance, breakdown support or plant installation, the facility to provide Homogenizer expertise together with our own expertise in the Centrifuge field can only be an advantage few other companies can offer.
All makes and models of Homogenizer can be looked after with fixed prices for the servicing, call-out charges and spare parts.
Further financial savings can be made when Homogenizers are incorporated into Service Contracts along with any Separators you may have on site, the main advantage being that while the plant is down for the Separator service, the Homogenizers are done at the same time thus giving a reduction in downtime and a reduction in costs to you. Centri-Force hold a large amount of spare parts in stock regardless of manufacturer, we strive to offer the best value for money to our customers by focusing on providing the best service possible in order to meet our customer demands at the most competitive prices.
All our customers are looking for value for money. Our overhead costs are modest which allows us to operate at unbelievably low hourly rates. Because we service equipment all over the UK we can keep our travel costs down by incorporating a field service with others in a particular area.
We are keen to help and we will be pleased to discuss any issues you may have:
Centri-Force Engineering Co. Ltd.
1-7 Montrose Avenue, Hillington Park, Glasgow G52 4LA.
Scottish Registered Company SC70659
VAT Reg. No. GB 334 3138 81.
Tel: +44 (0)141 882 3351